Smart Mobile High Density Storage System

● The hanger adopts an integral shelf board with a reinforcing plate and a hanger board with clasps, and the shelf board is flat and firm after assembly. Automatic gear shifting structure. The crank can stop in a vertical position by itself, and the handle can be folded to avoid obstacles to traffic.

● The chassis frame combination is a welded chassis segmented combination, with high processing accuracy, good docking interchangeability, and wide range of joints.

● The surface is sprayed with plastic. There are three types of guide rails: embedded type, reinforced support type, and floor flat type. The embedded type track is laid on the ground cement. The cushion layer is required to be firm and flat. The surface layer is applied after the guide rail is paved. The ground-laying track is directly installed on the already completed ground. The connection between the track and the ground is fixed by expansion screws.

● The surface treatment adopts emulsifier and alkali to help wash out the grease, phosphoric acid to remove rust, zinc-based film type phosphating, passivation, and finally powder spraying. Good decorative protection performance and strong adhesion. The treatment method of the inner wall of the rack is the same as the treatment method of the outer surface.